Contact Us

How to Install WiFi Booster

If you’re struggling with a weak wireless signal in certain areas of your home, a WiFi booster may be the answer to your connectivity problems. WiFi routers have certai coverage and bigger the area to cover, poorer the sigal will be further from the source, irrespectively of your broadband option.

In this article, we’ll walk you through the steps on how to install a WiFi booster and improve your internet experience.

Step 1: Identify the optimal location for your WiFi booster

Before you start installing your WiFi booster, you need to find the best location to place it. Ideally, this will be an area where the wireless signal is still strong but not as strong as it could be. This will allow the booster to extend your signal to the areas you need it most. You can use a WiFi analyzer app to test signal strength, test wifi speed and identify the ideal location.

Tip: It is a common mistaake to install your WiFi extender at the edge of covered area where the signal is already weak. This means that the repeated signal itself will inherit its poor quality!

Step 2: Determine your WiFi booster type

There are two types of WiFi boosters: plug-in wireless and wired. A plug-in booster is easy to install; you just plug it into a power outlet and follow the instructions. A wired booster requires you to run an ethernet cable from your router to the booster, which can be more time-consuming but often provides better performance. Determine which type of booster is best for your needs and purchase accordingly.

Tip: For every day use wireless wifi extender will be a better option as it’s easy to install and doesn’t require running cables.

Step 3: Begin the installation process

For a plug-in booster, start the installation process by plugging it into an outlet in the optimal location you identified earlier. Make sure it’s turned on and that you have another device nearby to help with the next steps. All WiFi repeaters come with instructions how to do it and if you bought second-hand wifi device, it should be easy enough to find instructions on the Internet!

Step 4: Connect to the booster

Use your device to connect to the booster. This may take a few minutes, so be patient. Once you’ve connected, open a web browser and go to the router’s configuration page. You can typically find the IP address for this page on the bottom of your router or via a quick Google search. 

Step 5: Configure the booster

Once you’re on the router’s configuration page, find the page for wireless settings. You should see an option to set up a wireless extender. Follow the instructions to configure the extender. Make sure to choose the same network name and password as your existing WiFi network, so devices can easily switch between the two signals without any issues.

Step 6: Test and optimize your connection

Once you’ve finished the configuration process, it’s time to test whether the WiFi booster is working correctly. Take your device to the area where you previously had a weak wireless signal and make sure you can now connect to the internet without any issues. If not, you may need to adjust the location of your booster or try a different type of booster.

The easiest way to test is to run wifi speed test. Make sure you do your wifi test at least twice to compare the results!

In conclusion, installing a WiFi booster isn’t difficult and can drastically improve your internet experience in areas with weak signals. By following these steps, you’ll have a better understanding of how to install a WiFi booster and get the best performance out of your internet connection.

Leave a Reply

Your email address will not be published.